Add Product

Search Results:

Reply
Posts: 18,397
Topics: 3,254
Kudos: 598
Solutions: 506
Registered: ‎09-29-2008

Re: Remote Control Codes

Hello sunny8 and dr,

Welcome to Community@Insignia™!

Please read the first post in this thread and reply with the requested information (i.e., TV model number and universal remote brand and model number).

Regards,
John
Insignia™ Support

John|Social Media Specialist | Best Buy® Corporate
Give Kudos if you like this post or Accept as Solution if it answers your query!
Posts: 18,397
Topics: 3,254
Kudos: 598
Solutions: 506
Registered: ‎09-29-2008

Re: Insignia Remote Control Codes for Bose

Hello apopkarvp,

Unfortunately, not every universal remote control (even ours) is compatible with every device.  If the search feature doesn't find a working code, then the remote and Bose system are not compatible.  You may wish to consider a higher-end universal remote if you want a single remote to control all of your devices.

Regards,
John
Insignia™ Support

John|Social Media Specialist | Best Buy® Corporate
Give Kudos if you like this post or Accept as Solution if it answers your query!
Visitor
Posts: 2
Registered: ‎06-09-2011

Re: Remote Control Codes

requesting a remote control code

The remote control manufacturer and model number.
sony RM-EZ2

The model number of your TV.
Insignia IS-TV040925

Any additional details about your situation that might help us help you.
have to replace OEM remote which has broken power button

Visitor
Posts: 2
Registered: ‎06-08-2011

Remote control

I bought a Insignia 19" model # NS-19E720A12 REV A. I would like to know if I can use the remote that came with TV to add on to so it will control my Sony VCR (RMT-V402B)? If possible can you give me directions how to do it ? Also I purchased a GE universal remote control 24991 and I tried getting a response from TV and got nothing. I had intentions of going to one remote rather than hold one in each hand. 

Posts: 18,397
Topics: 3,254
Kudos: 598
Solutions: 506
Registered: ‎09-29-2008

Re: Remote control

Hello michaelgthimm,

Welcome to Community@Insignia™!

The Insignia TV does not have a universal remote so you will have to use the GE remote to control the TV. The codes that should work with the TV are 1181, 1180, 1175, 1171, 0103, 0189, 0217, 0135, 0133, 0116, 0167, 1148, 0456, 0029, 0905, 1406, 1407, or 1408.

 

If none of those codes work then I would recommend using the search feature by the following steps:

  1. Turn the TV on.
  2. Press and hold the setup button on the remote until the red indicator light stays on.
  3. Press the TV button.
  4. Press the on/off button until TV turns off (may take up to 300 presses).
  5. Press enter to lock the code.

 

Regards,
John
Insignia™ Support

John|Social Media Specialist | Best Buy® Corporate
Give Kudos if you like this post or Accept as Solution if it answers your query!
Visitor
Posts: 2
Registered: ‎06-08-2011

Re: Remote control

Hey John, Thanks for the help everything is working fine. Mike T.

Visitor
Posts: 1
Registered: ‎06-11-2011

Re: Remote Control Codes

We have an old insgnia tv model number IS-TVCA102212 and we currently have pvr boxes hooked up. The remote is an IR universal remote, AT6400 made by motorola i think but could be wrong. If you have the universal codes that would be appreciated. Thank you.

Visitor
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes

Hello Stat_Chick,

 

I was unable to find a code for the IS-TV040925 using the RM-EZ2 remote, however you can use the code search feature by following these steps:

 

  1. Turn on the TV.
  2. Press and hold the "Set" button on the remote then press the "Power" button.
  3. Press the "TV' button on the remote.
  4. Press and release the "CH+" button followed by the "Power" button.
  5. Repeat step 4 until the TV turns of, this could take up to 70 tries before the TV turns off.
  6. When the TV turns off press the "Ent" button to save the code.
Visitor
Posts: 1
Registered: ‎06-13-2011

TiVo Remote for Insignia ns-ltdvd32-09

I am trying to use a TIVO remote to operate my Insignia NS-LTDVD32-09 tv. Using the remote code 0091, I am able to control volume, but I cannot change the input selection nor control any DVD functionality. The numbers on the remote are 090906/A1. Is there a remote code that will allow me to control the input and DVD?
Visitor
Posts: 1,684
Registered: ‎03-22-2011

Re: Remote Control Codes

Hello Mr_nasty,

 

There is not a specific code for this TV, however I would suggest using the code search feature of the remote by following these steps:

 

  1. Turn on your TV.
  2. Press and hold the "TV" and "OK" buttons on the remote, release the buttons and all the mode buttons will blink twice.
  3. Press 9 9 2 and the TV button will blink twice.
  4. Point the remote at the TV and press "Play".
  5. When the TV turns off press the "Enter" button to save the code and exit the code scan.