10-16-2008 09:16 AM
10-23-2008 10:33 AM
If you already have your external antenna connected to the TV’s coaxial cable input, you may only need to change the TV’s signal type to “Antenna” and verify that you have the TV on the correct input station. Changing the signal type to Antenna tells the TV’s tuner to look for signals through the attached antenna/receiver, and can generally be done through the TV’s “Channel” menu. If you wind up changing the signal type though, it’s also highly suggested that you run the TV’s auto-programming function a second time.
Additionally, you’ll want to make sure that your TV is on the correct input station and is not looking for a signal through an external device, such as a VCR/DVD recorder. After all, if your TV’s input station is set to an external device, you would be limited to watching whatever station that device was on at any given time.
Hope this helps you out.
Geek Squad® Community Connector
Go Ahead. Use Us.