Add Product

Search Results:

New Member
Posts: 1
Registered: ‎01-04-2009

Digital Stations Weak

My digital TV stations work properly when I watch them without my Sony surround sound turned on.  When I try to watch the digital channel with the surround sound on, the station becomes blurry and eventually the station turns blank with a weak signal icon that appears.  If I turn the surround sound unit off, it becomes perfectly fine.  I use a digital audio optical cable to connect my Samsung TV to the Sony surround sound.  Any ideas on what the problem is?
Valued Member
Posts: 63
Registered: ‎12-22-2008

Re: Digital Stations Weak

That sounds like you are having some electrical interference problems with the electronics in your surround system.


Try moving all video cables as far away from the surround system as possible.


If you are routing the video cable through the receiver, try routing the video cable directly to the TV.


If using a cable or satellite receiver, move it away from the surround system.


If you use an over the air antenna then make sure that the coax cable is also away from all other cables.


If it is impossible to move the cables away from the others, then make sure that the video cable crosses all other cables at 90 degrees to minimize interference.


Hope this helps...

I do not work for Best Buy and am not affiliated with them in any way. I like HT and want to help people improve their HT experience. "There is a LOT more than just having a TV to make a home theater"
Posts: 11,115
Topics: 1,809
Kudos: 915
Blog Posts: 0
Solutions: 351
Registered: ‎11-10-2008

Re: Digital Stations Weak

I bought an amplified RCA antenna and that solved my over the air digital reception issue.
Best Buy Forums Super User since 2008. Please note I am not employed by Best Buy and I answer questions on my own time. If you find something helpful please add kudos to it. Should something solve your issue please remember to mark inquiries as solved.