Rocketfish

[FAQ-RF]

1. Loosen the screw at the bottom of the arm assembly using the 5/32” hex key.
2. Adjust the swivel tension using the 5/32” hex key.

[FAQ-RF]

The patented tilting technology allows the TV to hold its position without having to loosen or tighten the tilt adjustment knob. However, if the knob has previously been tightened, adjust the tilt of the TV forward or backward 10 degrees by slightly turning the knob with your fingers or using the hex key provided. Loosen the knob, and adjust the TV forward or backward to your desired position. The TV will hold its position without having to retighten the knob.

[FAQ-RF]

• You can slide the arm assembly on the wall plate.

1. Loosen the two cap screws that secure the bottom of the arm assembly to the wall plate.
2. Slide the arm assembly left or right to desired location.
3. Retighten the two cap screws.

[FAQ-RF]

The wall plate holds the TV 2.7” from the wall when in the home position.

[FAQ-RF]

The wall plate holds the TV 10” from the wall when it is fully extended.

[FAQ-RF]

See a Geek Squad agent at your local Best Buy for in-home installation services or visit http://www.geeksquad.com/services/tv-video/ for more information.

[FAQ-RF]

• This Rocketfish wall mount can be used on a wood stud wall with 16” centers only.
• It cannot be used with concrete walls or metal stud walls.

[FAQ-RF]

This mount is compatible with TVs ranging in size from 32” to 56”.

[FAQ-RF]

Yes, the maximum weight restriction for this wall mount is a TV no larger than 130 lbs.

[FAQ-RF]

You can find more information about this wall mount in the documentation that came with the wall mount or on the Rocketfish website: www.rocketfishproducts.com/products/home-theater/RF-TVMFM03.html.