Add Product

Search Results:

New Member
Posts: 2
Registered: ‎05-17-2019

HDCP 2.2 Issue with Rocketfish 4K HDMI Splitter RF-G1603

I have a Marantz SR7009 AVR configured for 7.1.4 Dlby Atmos, a Samsung K8500 UHD disc player with two HDMI outputs, and an LG SK9000 TV.  The bottom line is that I cannot get Dolby Atmos out of the AVR while displaying an UHD HDR10 image on the display.  First the AVR is not HDCP 2.2 compliant.  Second the sub (HDMI 2) output on the disc player does not pass Dolby Atmos.  This is where the HDMI splitter comes in.  I was hoping that I could split the signal coming out of HDMI 1 on the disc player, inserting one cable to an HDMI input on the TV (bypassing the noncompliant AVR) and then attaching the second cable to the bluray input on the AVR.  I tested using only the connection to the TV.  I get a beautiful HDR 10 image.  If I attach the cable to the bluray input on the AVR I get Dolby Atmos sound, but a 1080p image, with the your equipment is not compliant so we will downgrade your picture to HD.  I was able to program a delay in starting the AVR.  When the TV and disc player come on line the status reads 2160p.  After the AVR comes on the image is downgraded.  I have checked all the CEC, ARC settings and I am fairly sure I turned them all off.  It seems like even though I am going out from the splitter to the TV and to the AVR there is signal coming back through the cable from the AVR, through the splitter, and to the TV.  Is this a case of works as sesigned or am I missing something?


Thank you.

Posts: 1,041
Topics: 56
Kudos: 166
Solutions: 63
Registered: ‎11-30-2015

Re: HDCP 2.2 Issue with Rocketfish 4K HDMI Splitter RF-G1603

Hi, R8D9v2,

Thanks for posting with us!

It's understandable that you would like to have the best possible performance out of your Home Theater system, including your Rocketfish splitter. Your concerns are a little bit out of scope from what we typically handle through this forum, but never fear, we have specialists standing by, ready to help. You can connect with our Rocketfish support team by calling (800) 620-2790, by visiting the Rocketfish website, or by emailing



Fey|Social Media Specialist | Best Buy® Corporate
Give Kudos if you like this post or Accept as Solution if it answers your query!
New Member
Posts: 2
Registered: ‎05-17-2019

Re: HDCP 2.2 Issue with Rocketfish 4K HDMI Splitter RF-G1603

As it turns out the Samsung disc player does does not natively decode Dolby Atmos.  It relies on the receiver to decode the signal.  I upgraded my UBD-K8500 disc player with a Sony UBP-X800.  Now I have great sound with a great picture.  Thank you.