Add Product

Search Results:

Reply
Visitor
Posts: 1
Registered: ‎10-27-2009
Accepted Solution

Re: Remote Control Codes

My remote is made by Universal Electronics and issued by Cox cable, my tv is a Toshiba 52xv645u, and my Insignia blu-ray player is an NS-BRDVD3.  It is inconceivable to me that you guys make is SO difficult to get the universal remote codes for your products.  What is the point?  If one is not available, I will return the product for a more satisfactory brand.
Visitor
Posts: 281
Registered: ‎10-27-2009

Re: Remote Control Codes

HERE's a solution that may work for your remote.

Message Edited by mdavej on 10-28-2009 12:30 PM
Visitor
Posts: 1,174
Registered: ‎04-07-2009

Re: Remote Control Codes

Hello mdavej,

Welcome to Community@Insignia™!


You can try the code 0463 for COX cable.

 

Regards,
Gonzo
Insignia™ Support

Visitor
Posts: 281
Registered: ‎10-27-2009

Re: Remote Control Codes

If the COX remote is really UEI like the OP says, then 0463 can't possibly work. It's the right protocol, but TV 0463 is device 134, subdevice 5, not device 133, subdevice 237 like it needs to be. I tried it on my UEI remote to make sure, and as I expected, it didn't work. The codes I posted are the only possibilities at the moment.
New Member
Posts: 3
Registered: ‎05-20-2014

Re: Remote Control Codes

I tried these codes with the UEI remote that came with my Suddenlink HD DVR, and they didn't work.  It's model nubmer 1056B01, a version of the Atlas 5.  Do you happen to know any codes that will let me get this remote to work with the NS-BRDVD3?

 

Thanks,

Nex

Highlighted
Visitor
Posts: 281
Registered: ‎10-27-2009

Re: Remote Control Codes

Try this. Assign 1609 to the AUD button or 1913 to the AUX button. 2 blinks means it has the code. A long blink means it doesn't. If either of those work, then press and release the setup button quickly followed by 34906. If that works for power, then you can program all the functions per THIS post.
New Member
Posts: 3
Registered: ‎05-20-2014

Re: Remote Control Codes

Ok.  I didn't fully read your post when you said to use either the AUD or the AUX codes in the beginning. 

I was able to get the unit to power off by programming the AUD with 1609 and then issue the setup command 34906 to power off.  That worked!

 

Thanks for your help, and the great setup docs!

Message Edited by Nex969 on 10-28-2009 11:01 PM
Visitor
Posts: 2
Registered: ‎01-27-2011

Re: Remote Control Codes

I have the RC64L DIRECTV remote controler and want the code for insignia blu-ray NS-BRDVD3 please can somebody help me.

Visitor
Posts: 281
Registered: ‎10-27-2009

Re: Remote Control Codes

It won't work. Sorry. Get one of the models in my other post. All work very well with DirecTV and Insignia.

Visitor
Posts: 2
Registered: ‎01-27-2011

Re: Remote Control Codes

look I lost the insignia remote and I just want to use my blu-ray, there are anyone who sells the original insignia remote controller?