TV & Home Theater

[hammockman]

Ok here is my problem.tv is sanyo plazma dp 42740,blu ray is LG bd 630,reciver is sony str-dh520.Everything has been working great,put bluray in start it,puts audio in proper feature..Dolby truhd,dts hd master and so on.Now a couple of nights ago I put in 10 Commandmets blu ray and audio comes up LPCM 48.Try another disc and same thing happens.I cleared reciver and reset and it went back to TrueHD or DTS-HD MASTER.I turn off reciver and turn it back on and it goes back to LPCM mode.Dvd player is set to primary pass thru .What has gone wrong?Have I hit the wrong button before hand,is the HDMI cable bad,I dont know.Been working fine up til now.Any helpful answers appreciated.Thanks, Harry

[rwillen · Accepted solution]

This is a problem with these recievers. I found this here

http://www.avsforum.com/avs-vb/showthread.php?t=1330236&highlight=str+dh520&page=2:

In your STR-DH520's HDMI Settings, set the Passthrough option to OFF or Auto and the Audio Out option to AMP.

If Audio Out is set to Amp+TV, only audio formats that the TV can process are acceptable and may therefore be transmitted from the BD player. Since your TV can't handle HD audio, but by configuration must receive an audio signal it can handle, the BD player is banned from transmitting HD audio, and you get the effect you observe.