02-05-2014 04:29 PM
02-05-2014 04:30 PM
02-05-2014 04:32 PM
To connect speaker cables:
To connect the subwoofer:
02-05-2014 04:33 PM
Note: The following lists the default input connections. If you do not follow these defaults, see Question 6 to manually assign your HDMI input.
02-05-2014 04:34 PM
02-05-2014 04:35 PM
02-05-2014 04:39 PM
If you connect a device to an HDMI, component, or digital input, you must assign that device to an input (BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX, TUNER, or TV/CD). For more information about navigating the home theater receiver’s on-screen menu, see Question 14.
To assign HDMI inputs:
Note: When an HDMI IN is assigned to an input selector, the digital audio input for that input selector is automatically set to the same HDMI IN.
To assign component inputs:
To assign digital audio inputs:
Note: When an HDMI IN is assigned to an input selector, the digital audio input for that input selector is automatically set to the same HDMI IN. In addition to the usual inputs (such as COAX), you can also select HDMI inputs.
02-05-2014 04:40 PM
To use your home theater receiver as a Rocketboost sender/receiver, you need to install the Rocketboost Wireless Ready Card (RF-RBCARD).
To install the Rocketboost Wireless Ready Card:
02-05-2014 04:41 PM
02-05-2014 04:42 PM
Every new Rocketboost device you add to your Rocketboost network must be “joined” to your Rocketboost hub device. If the home theater receiver is the hub of your network, use the following steps to join each of your Rocketboost devices on your network. If you want to join your home theater receiver to an existing Rocketboost network, see Question 10.